PS3 Bluetooth Setup

  1. On your PLAYSTATION® 3’s main menu, go to: Settings -> Accessory Settings -> Manage Bluetooth devices.
  2. Select “Yes” when the PLAYSTATION® 3 asks if you want to register.
  3. Select “Start Scanning”.
  4. On the Headset - While the Headset is powered down, and the charge cable is unplugged, press and hold the power button until red and blue LEDs are flashing alternately. This indicates that the Headset is in Pairing Mode.
  5. On the PLAYSTATION® 3 - Select “Afterglow Bluetooth Headset” as the device to register.
  6. Enter a Pass Key of “0000”. The Headset LED will flash blue every 3 seconds, indicating a successful pairing.
  7. on your PLAYSTATION® 3’s main menu, go to: Settings -> Accessory Settings ->Audio Device Settings.
  8. Highlight “Input Device” and set it to “Afterglow Bluetooth Headset” and press Enter.
  9. Highlight “Output Device” and set it to “Afterglow Bluetooth Headset” and press Enter.
  10. Adjust the Microphone Level to a level that is comfortable for you and press Enter.
  11. When everything is set, press OK at the bottom of the screen.
Have more questions? Submit a request